Ask Danny | Ep. 16: Top 5 Simple Solutions for Bathroom Maintenance

This 7 days, Today’s Homeowner Radio Present co-host Joe Truini provides his Best 5 Very simple Options for the lavatory.

Water Spot Remover for Shower Doorways

Does your glass shower doorway have h2o spots? They’re a discomfort to clear away, and common cleaners merely cannot do the work. Nicely, here’s a top secret drinking water place remover that you might by now have with no recognizing it!

Nobody needs to wipe their shower door each time just after they use it to protect against h2o spots. And let’s be sincere — who has the time for that?

That is why it can help to have the appropriate instrument for regular servicing.

I like to use a glass cleaner with a formula that consists of rain repellant — like this a single. (This is an affiliate url. If you acquire this item, we will receive a modest fee at no further value to you.)

This sort of product or service is commonly marketed for cleaning bugs and removing water spots from automobile or truck windshields, but that doesn’t signify it only works on these surfaces! So appear in the automotive aisle if you can not locate the product or service in the vicinity of normal cleaners.

Now, why does this product or service function above typical domestic cleaners?

It’s mainly because the rain-repellant formulation causes h2o to bead up and repel off the shower doorway. That means your glass shower enclosure will have no water places!

Here’s how it is effective: Just spray the cleaner on the glass and use a towel to wipe it off — I often use a cotton microfiber towel.

Now you have an straightforward drinking water place remover! Not only is the glass clean, but it also repels drinking water with no recognizing.

View: Easy Water Place Remover for Your Shower Doorway

How to Clean and Deodorize Bath Sink

It is not generally you deliver baking soda and vinegar into a rest room, but you can use them to thoroughly clean and deodorize a bathroom sink.

Sinks generally become slow-draining, and they can get clogged up with cleaning soap scum and hair. They will also deliver a rather funky odor, so here’s how to get rid of that.

Get started with just one-third cup of baking soda. You do not have to be as well exact, but you will will need to acquire about a third of a cup or so and dump it in the drain.

Subsequent, get 1 full cup of vinegar. White vinegar is a genuinely robust cleansing agent that you can use all over the residence.

Immediately after it hits the baking soda, allow it fizz down for a couple minutes. Some persons may use bleach listed here, but bleach can truly consume the finish correct off of some tub fixtures, so you never want to use it.

After the baking soda and vinegar have calmed down a small bit, stick to up with a comprehensive kettle of sizzling drinking water. This will, in mixture with the vinegar and the baking soda, minimize through anything at all that may possibly be clogging up the sink.

If you do this treatment after a thirty day period, you are going to have a truly sweet-smelling sink and a totally free-flowing drain.

Watch: The Effortless Way to Clean and Deodorize Your Sink

How to Switch a Toilet Flapper Valve

If you have a rest room that’s regularly jogging, the offender is likely a leaky flapper valve. Around time, flapper valves may possibly turn into cracked or warped, which can allow h2o to leak out.

Here’s how to substitute it:

• Switch the drinking water off to your rest room.
• Flush the drinking water out so the tank is vacant
• Unhook the old flapper valve and snap on the new one.
• Adjust the chain to make certain the size is suitable.
• Flip the drinking water again on and flush the rest room a few of occasions to make positive the flapper valve is operating properly.

Observe: How to Exchange Toilet Flapper Valve

How to Electricity-Clear Bathtub Tiles

Scrub brushes get the job done very well for cleaning, but they demand a ton of elbow grease. To convert a common hand scrub brush into a energy attachment for your drill:

1. Reduce the deal with off a round scrub brush.
2. Drill a hole in the center of the brush.
3. Insert a 4-inch lengthy equipment bolt in the gap from the bristle facet.
4. Place a washer and nut on the back again side and tighten it up.
5. Chuck the bolt into a drill.
6. Operate the drill at medium velocity when working with the scrub brush attachment.

Watch: How to Clear Tiles Faster Than At any time

How to Clean a Clogged Showerhead

Showerhead spray nozzles can come to be clogged around time with mineral deposits located in tap h2o.

To clean a showerhead so it sprays uniformly:

• Position a plastic bag loaded with white distilled vinegar around the showerhead.
• Attach a twist tie all over the showerhead arm to keep the bag in position.
• Enable the showerhead to soak in the vinegar for a single to two times.
• Take out the bag and convert the showerhead on entire drive.

If the nozzles are even now clogged, repeat the soaking approach till obvious.

Enjoy: How to Clear a Clogged Showerhead

Further more Examining