Today’s Homeowner Radio Podcast | October 22, 2022

Hour 1

Listen to hear how to fill in scratches on a wood floor, relevel a brick walkway, and a lot more.

Deal with for Scratched Floors

Joanne Millum has lovely hardwood flooring in her mid-century property. Unfortunately, when a repairman moved the fridge to check a filter, it still left gouges and scratches across the wood grain.  

She wishes to know: “Is there any way to deal with that? Just one facet is worse than the other.”

The only way to completely get rid of scratches is to refinish the ground.

But 1st, go to The Property Depot and get some Rejuvenate Wooden Floor Restorer. This item is like a cleaner/filler for wooden flooring. 

Clean up your wooden floors very first, and apply it to the broken spot. This will enable mix in the scratches to the relaxation of the flooring. 

Here’s our recommendation for stopping upcoming scratches near the fridge — Lower a slender piece of paneling to the width of the fridge, and retail store it in the garage. Any time you have to have to take the fridge out, idea it and slide the paneling underneath it to reduce any scratches. 

Releveling an Uneven Brick Walkway

Tree roots have shifted the bricks on Terri Dudley’s walkway, and it is now become a tripping hazard.

The tree has considering that been lower down, but the roots are continue to intact close to the stump and below the walkway. 

“I am a widow with a disabled daughter. Do you have any ideas on how to make it safe?” she asks.

In a condition like this, it is tough to convey to what can fix the trouble right until you start out eliminating the bricks — and certainly, you are going to need to have to take out them.

But be watchful. Relying on how the bricks are set up, eliminating the bricks could damage them unless they’re loosely laid. 

Do not contact the bricks that are flat and clean. Eliminate all of the types that are displaced, and use a reciprocating saw to cut the root from the walkway.

Then, pack in some soil or crushed rocks, and swap the bricks. Fill in any voids with sand.

This could not get it 100 per cent stage, but it will do away with the trip hazard. 

Hour 2

Listen to understand how to repair peeling paint, drill into tile, appropriate gaps in bamboo floors and additional. 

Take care of for Peeling Paint in a Toilet

The paint is peeling off the ceiling in Philip Costa’s lavatory. He says the ceiling was plastered with a swirled sample, and only a number of spots are peeling. 

“Do you have any strategies on how to repair this?” he asks.

1st, you need to make absolutely sure your exhaust enthusiast is working to eliminate all the very hot, moist air in the lavatory. 

The problem with exhaust supporters is they get soiled and grow to be ineffective. Test this exam: consider just one square piece of bathroom paper, flip the admirer on, then keep it about an inch absent from the grill. It should attach itself straight away to the admirer, indicating the admirer is drawing air up.

Make certain the exhaust lover is vented all the way to the outside. Make guaranteed the air is coming out outside the house. 

To start with, scrape all the paint off and sand the ceiling. Upcoming, paint the full ceiling with a bonding primer. Then, repaint it with two coats of acrylic latex paint. This binds it well. 

This, coupled with making positive the warm, moist air is vented out, really should eliminate the peeling paint. 

Suggestion for Drilling into Tile

Louis Sanchez just transformed her grasp lavatory, which incorporated tiling all around the 3 walls of the rest room alcove. The tile extends up about 36 inches and is trimmed along the major edge with a normal-stone chair rail. 

Ahead of this renovation took area, a bathroom paper holder was screwed into the drywall. Now, it is time to reinstall this fixture, and Louis needs to get all the proper safety measures.

“How would you recommend I connect the holder to the tile?” Louis suggests. “I’m fairly handy, but I’m concerned about cracking our model-new tile occupation.”

She’s proper to get worried. Striving to drill via a ceramic tile encompass can be a obstacle. The slick, glazed floor makes the masonry drill bit wander all around the tile.

I’ve heard some tips about applying a nail to tap a slight indentation in the tile for a setting up level, but this may possibly end up cracking your tile.

As a substitute, attempt this: Spot an “X” designed from masking tape on the spot you want to drill. Use a pencil to mark the place on the leading of the tape.

The paper floor of the tape will continue to keep your drill little bit in area, making it possible for you to drill the hole where by you require it.

As soon as drilled, basically take away the tape, and you’re completely ready to set up the toilet paper holder! I endorse utilizing a toggle bolt that goes through the tile into the cavity in the wall. 

Of training course, if you are nervous about ruining the new tile, you can do away with the attached bathroom paper holder and choose for a free-standing one as an alternative.

Gaps in Bamboo Flooring

Cathy Cooly had bamboo hardwood floors set up in her eating area in 2013. She’s considering the fact that recognized a hole that is about 4 ft extensive and about 1/8-inch extensive. 

And she doesn’t want the predicament to get any worse.

“What can I do to prevent it from gapping or what can I do to take away the gap in the ground?” she asks. 

To start with, she ought to know that a bamboo hardwood floor is commonly glued down, so you can’t transfer the boards as you can with laminate floating flooring.

You can try to fill in the gap with wood putty, but take into account that the gap could be caused by thermal expansion.

In the wintertime, wood contracts, so that could be why the gap is apparent. If you wait right until summer time, the wooden might expand and fill the hole on its possess. 

For now, she can fill the hole with a little something flexible, like caulk, to accommodate for the expansion. 

Very best New Merchandise

Take away uninvited guests without the need of harming your valuable pets! Safer Residence Ant, Roach & Spider Multi-Insect Killer Aerosol fights pests with the electrical power of pure oils. Master more >>

Easy Answers

Jack-O’-Lantern Guidelines — Just after carving your Halloween pumpkin, dip it into an ice tub with just one cup of bleach. Permit it soak for quite a few minutes, then dry it off and rub petroleum jelly on to the edges of all the cutouts.

This will assistance seal in dampness and make your jack-o’-lantern stay clean throughout the holiday. 

Bulb Removal Tip — Many modern array hoods have LED lights that are flush with the area, earning them hard to clear away for substitute or cleansing.

Moreover, the bulbs are not threaded into a socket, but instead have to be pushed up into the housing and rotated a little bit to disengage it from two protruding lugs.

So, here’s how to eliminate flush bulbs: Get a duration of duct tape and pinch it in the center to develop a T-form with a tab that will serve as a handle. Adhere the tape to the bulb, force up and twist it counter-clockwise.

Other Products and solutions and Inbound links Pointed out

Further Studying